Product Description
The Helion 2 XQ38F has a generation 2 thermal sensor, providing even more detail in difficult environmental conditions such as cold mornings, rain or fog.
New <40mK Thermal Sensor
By now, most thermal users are familiar with the sensor resolution of a device e.g. 384×288, and also the pixel pitch e.g. 17µm. The improvement of these new Series 2 devices concentrates on a key specification of thermal sensor technology – the NETD value.
The NETD (Noise Equivalent of Temperature Differential), expressed in millikelvins (mK) is one of the most important parameters for thermal sensors as it describes their sensitivity. The lower the NETD value, the higher the sensitivity.
In existing Helion, Trail and Accolade series models the NETD value was sub 60mK. The new <40mK sensor, exclusively manufactured by ULIS for Pulsar puts Pulsar devices at the forefront of the market with the devices all featuring a better image in conditions where there is a low-temperature difference such as during rainfall, fog or cold mornings. These environmental conditions are the most difficult for thermal imagers and this new sensor will provide a clearer image for users.
The Helion 2 XQ series features a 384×288 17µm thermal sensor and a F50/1.0 (XQ50F) or F35/1.0 (XQ38F) lens that provides a detection range of up to 1800m (XQ50F) & 1100m (XQ38F) for a deer-sized object. The lens is interchangeable and can be replaced with an alternative Helion Thermal Lens allowing the device to satisfy the need to have a spotter with a wide field of view (with the 38mm lens fitted) or by switching the lens, a high magnification unit (with a 50mm lens fitted).
In brief the Helion 2 XQ Series Features:
Long detection range
High magnification
Step-Up digital zoom
Frost-Resistant AMOLED display
50Hz Refresh rate
Focusable lens
Dioptre control
8 Colour modes
“Display Off” mode
PiP mode
Built-In photo & video recorder
16GB internal memory
Stream Vision compatible
User Friendly controls
Stadiametric rangefinder
IPX7
Wide operating temperature (-25°C to 50°C)
Four observation modes (Forest, Rocks, Identification and User)
Three calibration modes (Manual, semi-auto, auto)
Pixel correction
Quick-Change, rechargeable IPS5 battery pack
MicroUSB port
Retained lens cap
IPS Battery charger
Interchangeable lens (XP models)
Image Boost Technology
Reviews
There are no reviews yet.